EasyManua.ls Logo

Brother MFC-J6520DW - Sending a Fax; How to Send a Fax

Brother MFC-J6520DW
365 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Confidential
2-13
Error
Code
Contents
Refer to
page:
87 Recording paper jam
Switchback sensor stays in paper feeding state even after completion of
paper ejection action.
2-42
88 Recording paper jam
Switchback sensor cannot detect paper feeding state even papers are
fed during printing.
2-43
89 Paper width sensor cannot detect origin specified on the paper feed
roller.
2-43
8A PF encoder sensor cannot detect rotation of the paper feed motor. 2-44
8C Excessive current protection activated for the driver IC during paper
feed motor operation.
2-44
8F Paper feed motor cannot stop. Or, PF encoder sensor cannot detect
rotation of the paper feed motor.
2-45
A1 Document scanner sensor detects that document scanner is open. 2-45
A2 Document scanning position sensor detects length of document
900 mm or more.
2-45
A3 Document detection sensor detects that document is pulled out during
document scanning. Or, the document scanning position sensor cannot
detect document within specified time.
2-46
A4 ADF cover sensor detects opened cover state. 2-46
A5 Level of first side CIS scan result is detected as abnormal during FAX
transmission (first transmission.)
2-47
A6 Level of first side CIS scan result is detected as abnormal during FAX
transmission (after re-try.)
2-47
A7 Type of CIS unit and CIS type input value does not match. 2-47
A8 Matching of color parameter fails. 2-47
AC Level of second side CIS scan result is detected as abnormal during
FAX transmission (first transmission.)
2-48
AF CIS positioning abnormal (Home position cannot be found.) 2-48
BC Level of second side CIS scan result detected as abnormal during FAX
transmission (after re-try.)
2-49
BD Black level value abnormal at scanning 2-49
BF Document scanning position sensor detects a document of which length
is larger than the specified size for duplex scanning.
2-50
DF Modem communication failure 2-50
E0 Modem does not start normally even after resetting the modem. 2-50
E2 Wired LAN MAC address not registered. 2-51
E3 Wireless LAN MAC address not registered. 2-51

Table of Contents

Other manuals for Brother MFC-J6520DW

Related product manuals