BRP ROTAX 916 i A Series - Installation Overview; Oil Thermostat

BRP-Rotax
INSTALLATION MANUAL
INSTALLATION OVERVIEW
Figure 12.10: Lubrication system overview
1
Engine circuit
2
Turbocharger return line
OIL THERMOSTAT
When operating at low temperatures the installation of an oil thermostat parallel to the oil
cooler is highly recommended. The advantages are safe oil pressure after cold start and
prevention of fuel and water accumulation in the oil.
Effectivity: 916 i A / C24
Edition 0/Rev. 1
79–00–00
Page 15
December 01 2023