BRP-Rotax
INSTALLATION MANUAL
INSTRUCTION
Engines require instructions regarding their installation, application, use, operation, main-
tenance and repair.
Technical documentation and regulations are useful and necessary complementary ele-
ments for trainings, but can by no means substitute for theoretical and practical
instructions.
These instructions should cover explanation of the technical context, advice for operation,
maintenance, installation, use and operational safety of the engine.
Safety notice In this technical Manual passages concerning safety are especially marked. Pass on
safety warnings to other users!
Accessories This engine must only be operated with accessories supplied, recommended and re-
leased by BRP-Rotax. Modifications are only allowed after consent of the engine
manufacturer.
Spare parts
See Illustrated Parts Catalog (IPC), latest issue for the respective engine
type.
NOTICE
Only use GENUINE ROTAX® spare parts. Spare parts must meet the require-
ments defined by the engine manufacturer. This can only be guaranteed when us-
ing spare parts and/or accessories. Spare parts are available at Authorized
Distributors and their independent Service Centers. Any warranty by will become
void if spare parts and/ or accessories other than spare parts and/or accessories
are used (see latest Warranty Conditions).
See relevant Service Letter on www.flyrotax.com.
Standard tools /
Special tools
NOTICE
Only use tools and appliances which are suitable for the relevant task according
to the latest Manuals.
State of delivery
m WARNING
Engine and gearbox are delivered in “dry“ conditions (without fuel, oil and
coolant).
Before putting the engine into operation it must be filled with oil and cooling liquid. Use
only oil and coolant as specified.
See latest Operators Manual (OM) and Service Instruction SI-916 i-001
“Selection of suitable operating fluids“, current issue.
00–00–00
Page 16
December 01 2023
Effectivity: 916 i A / C24
Edition 0/Rev. 1
To Next Page
Loading...
Need help?
General
