BRP-Rotax
INSTALLATION MANUAL
STARTER RELAY ASSY. TECHNICAL DATA
NOTICE
Activation of starter relay limited to short duration. The duty cycle over an inter-
val of 4 minutes is 25%.
Figure 13.5: Starter relay
1 Main current connections 2
Control wiring
3
Mounting point
Nominal voltage 12 V/DC
Control voltage min. 6 V / max. 18 V
Switching current max. 75 A (permanent)
max. 300 A/1 s (short duration)
Permissible ambi-
ent temperature
min. -40 °C (-40 °F) / max. +100 °C (212 °F)
Weight See Chapter 72–00–00 section Weight.
Main current
connections
M6 screw connection (tightening torque 4 Nm (36 in.lb.)) suitable for cable terminals ac-
cording to DIN 46225 (MIL-T-7928; PIDG or equivalent).
Control wiring 6.3x0.8 plug connector
suitable for Faston connector (female) according to DIN 46247 (MIL-T-7928; (PIDG) or
equivalent).
Effectivity: 916 i A / C24
Edition 0/Rev. 1
80–00–00
Page 9
December 01 2023
To Next Page
Loading...
