Bruker QUANTAX EDS - Page 99

5.15 Line Scan QUANTAX EDS
99
1
1
Use the Profiles tab icon to
a) Save data
Save the composite element profile as .bmp,
.jpg, .png, .tif file format including Composite
element profile, Scan image or both.
b)
Add
data
to project
Alternatively, right click into the profile and
use the local
Line scan menu.
Confirm the pop
-up window Do you want to
save point spectra too?
by clicking
to transfer spectral data.
c) Add data to report.
12
Use the
thumbnail bar icon to Add
Line scan
to report.
Highlight elements in profile thumbnails.
Select
Individual element profiles to add
separate profiles for each element. Select
Composite element profile
to add all
selected elements in one diagram and the
scan image.
13
To quantify a line scan proceed with
section 5.16.
Fig. 5.15-1 Line scan acquisition