Buell 2007 LIGHTNING Service Manual

2-70 2007 Buell Lightning: Chassis
HOME
14. Remove complete shift assembly.
a. Remove flange bolt (6) from primary cover.
b. Remove engine shift lever assembly (3). Do not
scratch primary cover.
15. See Figure 2-102. Remove the outer ramp and hook (1)
from the cable end (3) and coupling (2). Remove cable
end from slot in coupling. See 6.3 CLUTCH RELEASE
MECHANISM.
16. See Figure 2-103. Unscrew the cable fitting from the pri-
mary cover. Remove clutch cable and fitting.
17. Remove and discard o-ring on the clutch cable fitting.
Figure 2-101. Primary Cover and Shifter Assembly
1. Primary cover
2. Clutch inspection cover
3. Engine shift lever
4. Shift pedal assembly
5. Shift linkage assembly
6. Flange head bolt
7. Drain plug
8. Sleeve, shift lever
9. Bearings, shift lever
3
1
4
5
6
2
7
b1169x2x
8
9
9
Figure 2-102. Clutch Release Mechanism (Typical)
1. Outer ramp and hook
2. Coupling
3. Cable end
1
23
8413
Figure 2-103. Clutch Cable and Fitting
10607

Buell 2007 LIGHTNING Specifications

General

Year	2007
Manufacturer	Buell
Model	Lightning
Category	Motorcycle
Displacement	1203 cc
Bore x Stroke	88.9 mm x 96.8 mm
Compression Ratio	10.0:1
Fuel System	Electronic fuel injection
Transmission	5-speed
Final Drive	Belt
Rear Suspension	Showa shock absorber
Rear Brakes	Single disc, 1-piston caliper
Engine Type	V-Twin
Ignition	Digital
Front Suspension	Showa inverted fork
Front Brakes	Single disc, 6-piston caliper
Front Tire	120/70 ZR17
Rear Tire	180/55 ZR17
Wheelbase	52.0 inches
Seat Height	30.1 inches
Dry Weight	395 lbs
Fuel Capacity	14.5 liters