EasyManuals Logo

Buell 2007 LIGHTNING Service Manual

Buell 2007 LIGHTNING
661 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #75 background imageLoading...
Page #75 background image
2-14 2007 Buell Lightning: Chassis
HOME
8. See Figure 2-14. Remove the BACKING PLATE (Part
No. B-43993-11) from the long forcing screw. Reinstall
the Backing Plate onto the forcing screw, with the smaller
diameter toward the hex-head.
9. Insert the forcing screw through the wheel hub on the
opposite side of the wheel.
10. See Figure 2-15. Install the spacer.
11. See Figure 2-16. Insert a new wheel bearing (1)
squarely into the hub, with the lettered side facing out
(away from the wheel).
12. Slide the FRONT BEARING INSTALLER (Part No. B-
43993-9) (2) onto the forcing screw (3), with the smaller
diameter toward the bearing bore.
13. Install a washer (4), Nice bearing (5) and nut (6) onto the
forcing screw (3).
NOTE
See Figure 2-15. Center the spacer while installing the wheel
bearing. Failure to center the spacer could cause the bearing
not to pull in straight.
14. While holding the forcing screw (3), tighten the nut (6)
until the bearing contacts the spacer.
15. Remove the nut, bearing, washer, FRONT BEARING
INSTALLER (Part No. B-43993-10) and forcing screw.
16. Install the wheel. See INSTALLATION under 2.5 FRONT
WHEEL.
Figure 2-14. Insert Forcing Screw and Backing Plate
Figure 2-15. Install the Spacer
i04283
1. Forcing screw
2. Backing Plate
1
2
i04286
1. Forcing screw
2. Spacer
2
1
Figure 2-16. Install the Bearing
i04287
1. Wheel bearing
2. Front Wheel Bearing Installer (B-43993-9)
3. Forcing screw
4. Washer
5. Nice bearing
6. Nut
5
1
6
3
4
2

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Buell 2007 LIGHTNING and is the answer not in the manual?

Buell 2007 LIGHTNING Specifications

General IconGeneral
Year2007
ManufacturerBuell
ModelLightning
CategoryMotorcycle
Displacement1203 cc
Bore x Stroke88.9 mm x 96.8 mm
Compression Ratio10.0:1
Fuel SystemElectronic fuel injection
Transmission5-speed
Final DriveBelt
Rear SuspensionShowa shock absorber
Rear BrakesSingle disc, 1-piston caliper
Engine TypeV-Twin
IgnitionDigital
Front SuspensionShowa inverted fork
Front BrakesSingle disc, 6-piston caliper
Front Tire120/70 ZR17
Rear Tire180/55 ZR17
Wheelbase52.0 inches
Seat Height30.1 inches
Dry Weight395 lbs
Fuel Capacity14.5 liters

Related product manuals