Buell P3 - Page 108

2007 Buell P3: Chassis 2-3
HOME
Rear drive sprocket bolts 28-31 ft-lbs 38-42 Nm
Apply several drops of Loctite Thread-
locker 271 (red) to last few threads. Page
2-13
Rear fender mounting screws 30-36 in-lbs 3-4 Nm Page 2-64
Rear isolator-to engine crankcase 32-34 ft-lbs 46-50 Nm
Apply several drops of Loctite 243 (blue)
to last few threads, Page 2-74
Rear master cylinder mounting screws 48-72 in-lbs 5-8 Nm
Apply several drops of Loctite 243 (blue)
to last few threads, metric, Page 2-36
Rear muffler strap screws 17-19 ft lbs 24-25 Nm Page 2-59
Rear shock top and bottom bolt 35-40 ft-lbs 47-54 Nm Page 2-42
Steering head upper triple tree clamp
screws (at sliders)
13-16 ft-lbs 18-22 Nm Loctite Anit-Seize, Page 2-55
Swingarm bolt 24-26 ft-lbs 33-35 Nm
Apply anti-seize to bolt and install, Page
2-58
Swingarm pinch bolt 17-19 ft-lbs 23-26 Nm
Apply several drops of Loctite 243 (blue)
to last few threads, Page 2-58
Switch housing screws, right side 12-17 in-lbs 1-2 Nm Metric, Page 2-43
Valve stem nut 42-44 in-lbs 4.7-5.0 Nm Page 2-21
Windscreen screws 9-11 in-lbs 1 Nm Page 2-68
ITEM TORQUE NOTES