Canon imagePROGRAF iPF5100 - Page 146

Handling rolls
Manual (when using paper or media that cannot be cut using the
Cutter Unit )
1. Select Manual as the Cutting Mode in the printer menu, and then press OK .
The setting is updated, and an equals sign “=” is displayed at left.
Cutting Mode
= Manual
2. Starts printing.
Complete the print settings.
3. Press the Online button.
Roll paper is fed to the specied cut position and then automatically stopped.
4. Use scissors to cut the roll paper along the cut line.
5. Press the Online button.
After the roll is rewound, it stops automatically .
132 Handling Paper