Handling rolls
Paper Cutting (to have the roll cut at your specied position)
1. If the printer stops operating after printing, press the Online button.
The printer goes of ine, and the following screen is displayed.
Of ine
FeedPaper ↑↓
2. Press ▲ or ▼ to feed the roll paper to the position for cutting.
3. Select Y es as the Paper Cut in the printer menu, and then press OK .
The setting is updated, and an equals sign “=” is displayed at left.
Paper Cut
= Y es
After the roll paper is cut, it is rewound automatically .
Caution
• If paper would be short when cut at a particular position, the roll may automatically be advanced in
some cases before cutting.
Handling Paper 133
To Next Page
Loading...
