Cannot print over a network
8. Press ◄ or ► to select Ethernet T ype , and then press ▼ .
Ethernet Driver
Ethernet T ype ↓
9. Press ◄ or ► to select the Ethernet type, and then press OK .
The setting is updated, and an equals sign “=” is displayed at left.
Ethernet T ype
= 10 Base-T
Return to the Ethernet Driver menu.
10. Press ◄ or ► to select Spanning T ree , and then press ▼ .
Ethernet Driver
Spanning T ree ↓
1 1. Press ◄ or ► to enable or disable spanning tree support, and then press OK .
The setting is updated, and an equals sign “=” is displayed at left.
Spanning T ree
= Use
Return to the Ethernet Driver menu.
12. Press the Online button.
After the conrmation message is displayed, press OK .
The printer will now restart.
Note
• If an error message is displayed, check the settings and correct any invalid values.
• T o cancel the setup process, hold down the Stop/Eject button for a second or more.
692 T roubleshooting
To Next Page
Loading...
Need help?
General