Resizing Originals by Entering a Scaling Value (Mac OS X)
This topic describes how to enlarge originals before printing by entering a scaling value, based on the following example.
• Document: Any Type
• Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
• Paper: Roll paper
• Paper type: Plain Paper
• Roll paper width: A2/A3 roll (420.0 mm [16.5 in])
1. This sets the B Format for and C Paper Size.
Note
• The configuration method varies depending on the OS and application software you are using.
If Page Setup is displayed in the application menu, the settings are configured by opening the Page
Attributes dialog box from Page Setup.
If it is not displayed, the settings are configured in the upper part of the printer driver displayed
when you select Print from the application software menu.
2. Select the printer in the A Printer list.
3. In the F Paper Size list, click the size of the original. In this case, click ISO A4.
Enhanced Printing Options
>
Printing enlargements or reductions
>
iPF755
Resizing Originals by Entering a Scaling Value (Mac OS X)
2
85
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
