Canon imagePROGRAF iPF755 User Guide

Messages regarding paper
MediaType Mismatch ...................................................................................................................................... 878
The paper is too small. .................................................................................................................................... 879
The paper is too small. .................................................................................................................................... 879
PaprWidth Mismatch ....................................................................................................................................... 880
Paper size not detected. ................................................................................................................................. 881
Insufficient paper for job ................................................................................................................................. 882
This paper cannot be used. ............................................................................................................................ 882
Roll printing is selected. .................................................................................................................................. 882
Roll printing is selected, but sheets are loaded. ............................................................................................ 883
The roll is empty. ............................................................................................................................................. 883
Sheet printing is selected. .............................................................................................................................. 884
Regular printing is selected, but a roll is loaded. ........................................................................................... 884
Paper jam ........................................................................................................................................................ 884
Paper is crooked. ............................................................................................................................................ 885
Paper not aligned with right guide. ................................................................................................................. 886
Cannot detect papr ......................................................................................................................................... 886
Paper cutting failed. ........................................................................................................................................ 886
End of paper feed. .......................................................................................................................................... 887
Rel lever is in wrong position. ......................................................................................................................... 887
Borderless printng not possible. ..................................................................................................................... 887
Paper position not suitable for borderless printing. ........................................................................................ 888
Roll paper is not securely in contact with roll holder. ..................................................................................... 888
MediaType Mismatch
Cause Corrective Action
When Detect Mismatch in the Control
Panel menu is set to Pause, the type of
paper loaded does not match the type
specified in the printer driver.
Follow these steps to ensure the paper type matches on the printer and in
the printer driver.
1. Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2. Either change the type of paper specified in the printer driver settings or
replace the loaded paper and change the paper type setting on the printer.
(See "Loading and Printing on Rolls.")
→P.6
(See "Loading and Printing on Sheets.") →P.9
You tried to print a test pattern for print-
er adjustment on several sheets, but
sheets of different types of paper were
used.
When printing a test pattern for adjustment, use sheets of the same type of
paper, in the required quantity. Replace the paper as follows and perform
adjustment again.
1. Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2. Replace the paper.
(See "Loading and Printing on Sheets.")
→P.9
3. Execute adjustment again from the control panel menu.
Press ▲ or ▼ to select Print, and then press the OK button to resume
printing.
However, note that this error may cause paper jams and affect the printing
quality.
Error Message > Messages regarding paper >
MediaType Mismatch iPF755
13
878
Downloaded from ManualsPrinter.com Manuals

Canon imagePROGRAF iPF755 Specifications

General

Printer Type	Large Format Printer
Maximum Print Resolution	2400 x 1200 dpi
Number of Ink Colors	5
Number of Nozzles	15, 360
Memory (Standard)	256 MB
Hard Drive	80 GB
Ink Droplet Size	4 picoliters
Operating Systems	Windows, Mac OS
Print Technology	Inkjet
Ink Type	Pigment/Dye
Maximum Print Width	36 inches
Connectivity	USB, Ethernet
Media Handling	Roll Feed
Media Width	8 inches to 36 inches
Media Thickness	0.07 - 0.8mm
Ink Colors	Cyan, Magenta, Yellow, Black
Media Sizes	Roll paper: 10"-36" (254mm-914mm), Cut sheet: 8"-36" (203.2mm-914mm)
Media Types	Plain Paper, Coated Paper, Photo Paper
Power Consumption	140W or less
Print Speed (Color)	D-sized print (33.1 x 23.4 inches) in approximately 28 seconds
Print Speed (Black & White)	D-sized print (33.1 x 23.4 inches) in approximately 28 seconds