EasyManuals Logo

Canon imagePROGRAF iPF755 User Guide

Canon imagePROGRAF iPF755
948 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #867 background imageLoading...
Page #867 background image
Printing does not start
The Data lamp on the Control Panel does not light up ................................................................................... 851
The printer does not respond even if print jobs are sent ................................................................................ 851
Ink Filling.. is displayed ................................................................................................................................... 851
The display screen indicates Agitating ........................................................................................................... 852
The Data lamp on the Control Panel does not light up
Cause Corrective Action
The printer is not on. Make sure the power cord is securely plugged in, all the way. Press the Power but-
ton to turn on the printer.
The target printer was not selec-
ted when printing. (The printer is
in Sleep mode.)
In Windows, select the printer by clicking Select Printer or Printer in the printing
dialog box and try printing again.
In Mac OS X, open the dialog box of the printer driver, select the printer from the
list of Printer, and try printing again.
The print job is paused. (The
printer is in Sleep mode.)
In Windows, restart the print job as follows.
1. Select the printer icon in the Printers and Faxes (or Printers) window.
2. Clear Pause Printing in the File menu to restart the print job.
In Mac OS X, restart the print job as follows.
1. Click Print & Fax. (This is identified as Printer Setup Utility or Print Center
in other versions of Mac OS X.)
2. Select the printer, and then Resume Printer (or Start Jobs) in the Printers
menu to restart the print job.
The printer does not respond even if print jobs are sent
Cause Corrective Action
In the Control Panel menu, Pause Print is
On.
Set Pause Print to Off.
(See "Pausing Printing.") →P.19
You have selected Save in mail box in
Output Method on the printer.
Print the job saved on the printer's hard disk.
(See "Printing Saved Jobs.") →P.582
Print jobs are pending. Manage the jobs on hold and print as needed.
(See "Managing Pending Jobs (Printing or Deleting Jobs on Hold).")
→P.580
Ink Filling.. is displayed
Cause
Corrective Action
The printer was forced off during
operation.
Wait until the system has been filled with ink. This process may take about sev-
en and a half minutes.
Troubleshooting
>
Printing does not start
>
iPF755
The Data lamp on the Control Panel does not light up
12
851
Downloaded from ManualsPrinter.com Manuals

Table of Contents

Other manuals for Canon imagePROGRAF iPF755

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon imagePROGRAF iPF755 and is the answer not in the manual?

Canon imagePROGRAF iPF755 Specifications

General IconGeneral
Printer TypeLarge Format Printer
Maximum Print Resolution2400 x 1200 dpi
Number of Ink Colors5
Number of Nozzles15, 360
Memory (Standard)256 MB
Hard Drive80 GB
Ink Droplet Size4 picoliters
Operating SystemsWindows, Mac OS
Print TechnologyInkjet
Ink TypePigment/Dye
Maximum Print Width36 inches
ConnectivityUSB, Ethernet
Media HandlingRoll Feed
Media Width8 inches to 36 inches
Media Thickness0.07 - 0.8mm
Ink ColorsCyan, Magenta, Yellow, Black
Media SizesRoll paper: 10"-36" (254mm-914mm), Cut sheet: 8"-36" (203.2mm-914mm)
Media TypesPlain Paper, Coated Paper, Photo Paper
Power Consumption140W or less
Print Speed (Color)D-sized print (33.1 x 23.4 inches) in approximately 28 seconds
Print Speed (Black & White)D-sized print (33.1 x 23.4 inches) in approximately 28 seconds

Related product manuals