Canon imagePROGRAF iPF755 User Guide

Cause Corrective Action
In the Control Panel menu, Width Detection is set to
Off.
Set Width Detection to On in the Control Panel menu.
Documents are printed in monochrome
Cause Corrective Action
In the Advanced Settings of the printer driver,
Monochrome, Monochrome (BK ink), or
Monochrome Bitmap is specified in Color
Mode.
In the Advanced Settings of the printer driver, specify Color in
Color Mode and try printing again.
The Printhead nozzles are clogged. Print a test pattern to check the color ink nozzles and see if they are
clogged.
(See "Checking for Nozzle Clogging.") →P.807
Line thickness is not uniform
Cause Corrective Action
In the Special Settings dialog box
of the Windows printer driver, Fast
Graphic Process is selected.
Access the printer driver Properties dialog box from Print in the File menu of
the source application, and follow these steps to print.
1. Clear the option Open Preview When Print Job Starts on the Main sheet.
2. Clear the option Page Layout on the Layout sheet.
3. Click the Special Settings button in the Layout sheet to open the Special
Settings dialog box, and remove the check from Fast Graphic Process.
The type of paper specified in the
printer driver does not match the
type loaded in the printer.
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.") →P.637
(See "Loading Sheets in the Printer.") →P.660
Make sure the same type of paper is specified in the printer driver as you have
loaded in the printer.
1. Press the Stop button and stop printing.
2. Change the type of paper in the printer driver and try printing again.
Lines are misaligned
Cause Corrective Action
The Printhead alignment is not ad-
justed.
Adjust the Printhead alignment.
(See "Automatic Adjustment to Straighten Lines and Colors (Head Posi.
Adj.).") →P.677
(See "Manual Adjustment to Straighten Lines and Colors (Head Posi. Adj.).")
→P.679
(See "Adjusting Line Misalignment (Head Inc. Adj.).")
→P.681
Troubleshooting > Problems with the printing quality >
iPF755 Documents are printed in monochrome
12
861
Downloaded from ManualsPrinter.com Manuals

Canon imagePROGRAF iPF755 Specifications

General

Printer Type	Large Format Printer
Maximum Print Resolution	2400 x 1200 dpi
Number of Ink Colors	5
Number of Nozzles	15, 360
Memory (Standard)	256 MB
Hard Drive	80 GB
Ink Droplet Size	4 picoliters
Operating Systems	Windows, Mac OS
Print Technology	Inkjet
Ink Type	Pigment/Dye
Maximum Print Width	36 inches
Connectivity	USB, Ethernet
Media Handling	Roll Feed
Media Width	8 inches to 36 inches
Media Thickness	0.07 - 0.8mm
Ink Colors	Cyan, Magenta, Yellow, Black
Media Sizes	Roll paper: 10"-36" (254mm-914mm), Cut sheet: 8"-36" (203.2mm-914mm)
Media Types	Plain Paper, Coated Paper, Photo Paper
Power Consumption	140W or less
Print Speed (Color)	D-sized print (33.1 x 23.4 inches) in approximately 28 seconds
Print Speed (Black & White)	D-sized print (33.1 x 23.4 inches) in approximately 28 seconds