No printhead
Cause Corrective Action
No Printhead is installed. Install the Printhead.
(See "Replacing the Printhead.") →P.809
Execute printhead cleaning.
Cause Corrective Action
The Printhead
nozzles are clog-
ged.
Follow these steps to clean the Printhead.
1. Stop printing by pressing â–² or â–¼ to select Stop Printing.
2. Clean the Printhead.
(See "Cleaning the Printhead.") →P.808
If the message is still displayed when printing, replace the Printhead.
(See "Replacing the Printhead.")
→P.809
Press â–² or â–¼ to select Print, and then press the OK button to resume printing. However, note
that this error may affect the printing quality.
If OK is shown on the Display Screen, clean the Printhead.
1. Press the OK button on the Control Panel to stop printing.
2. Clean the Printhead.
(See "Cleaning the Printhead.") →P.808
If the message is still displayed when printing, replace the Printhead.
(See "Replacing the Printhead.")
→P.809
Error Message
>
Messages regarding printheads
>
No printhead
iPF755
13
894
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
