Canon imagePROGRAF iPF755 User Guide

NetWare Settings
Configuring NetWare Network Settings .......................................................................................................... 776
Specifying the Printer's Frame Type ............................................................................................................... 777
Specifying NetWare Print Services ................................................................................................................. 781
Configuring the Printer's NetWare Network Settings With RemoteUI ............................................................. 784
Configuring NetWare Network Settings
Follow these steps to configure the network environment when using the printer in a NetWare network.
Important
• To configure network settings, you must be logged in with administrative rights such as Administrator. We
recommend that your network administrator configure the network settings.
1.
Configure the Ethernet frame type to be used in communication by the printer with the computer.
For details on configuring settings, see "Specifying the Printer's Frame Type." →P.777
2. Configure the NetWare print service such as the print server and queue.
For details on configuring settings, see "Specifying NetWare Print Services." →P.781
3. Configure the NetWare protocol details other than the frame type.
For details on configuring settings, see "Configuring the Printer's NetWare Network Settings With RemoteUI."
→P.784
After completing the settings of this procedure, configure the settings on each computer for printing in a NetWare
network.
4. Connect to the NetWare network.
Install the NetWare client software on all computers that are to perform printing, and log in to the NetWare server
or tree. For details on connecting, refer to the documentation for NetWare or your operating system.
5. Install the printer driver.
According to the instructions of your network administrator, install the printer driver on all computers that are to
perform printing. When installing, select Network Printer as the printer connection destination, and select the
queue created when configuring the NetWare print service.
6. Configure the printer port by the following procedure. If you configured the printer connection destination while
installing the printer driver, this procedure is unnecessary.
1. Open the Printers and Faxes (or Printers, Devices and Printers) window.
2. Right-click the icon of this printer and choose Properties (For Windows 7 and Windows Vista, Printer Prop-
erties) to open the printer properties window.
3. Click the Port (or Advanced) tab to display the Port (or Advanced) sheet.
4. Configure the print destination port to the print queue created when configuring the NetWare print service.
Network Setting > NetWare Settings >
Configuring NetWare Network Settings
iPF755
10
776
Downloaded from ManualsPrinter.com Manuals

Canon imagePROGRAF iPF755 Specifications

General

Printer Type	Large Format Printer
Maximum Print Resolution	2400 x 1200 dpi
Number of Ink Colors	5
Number of Nozzles	15, 360
Memory (Standard)	256 MB
Hard Drive	80 GB
Ink Droplet Size	4 picoliters
Operating Systems	Windows, Mac OS
Print Technology	Inkjet
Ink Type	Pigment/Dye
Maximum Print Width	36 inches
Connectivity	USB, Ethernet
Media Handling	Roll Feed
Media Width	8 inches to 36 inches
Media Thickness	0.07 - 0.8mm
Ink Colors	Cyan, Magenta, Yellow, Black
Media Sizes	Roll paper: 10"-36" (254mm-914mm), Cut sheet: 8"-36" (203.2mm-914mm)
Media Types	Plain Paper, Coated Paper, Photo Paper
Power Consumption	140W or less
Print Speed (Color)	D-sized print (33.1 x 23.4 inches) in approximately 28 seconds
Print Speed (Black & White)	D-sized print (33.1 x 23.4 inches) in approximately 28 seconds