Setting Item Description, Instructions
System
Setup
Rep.P.head Print Choose On to have the printer automatically execute
the Advanced Adj. operations after you replace the
Printhead. (See "Automatic Adjustment to Straight-
en Lines and Colors (Head Posi. Adj.).") →P.677
Nozzle Check In Frequency, specify the timing for automatic checks
of nozzle clogging. Choose Standard to have the
printer adjust the timing for checks based on the fre-
quency of nozzle use. Choose 1 page to check once
per page.
Select Warning > On to display warnings if the noz-
zles clog during printing.
Use RemoteUI Choosing Off prohibits access from RemoteUI. Set-
tings can only be configured from the control panel.
Reset PaprSetngs Restores settings that you have changed with Media
Configuration Tool to the default values.
Erase
HDD
Data
High Speed Erases file management data for print job data stored
on the printer's hard disk. (See "Erasing Data on the
Printer's Hard Disk.") →P.709
Secure High Spd. Overwrites the entire hard disk with random data.
(See "Erasing Data on the Printer's Hard Disk.")
→P.709
Secure Overwrites the entire hard disk with 00, FF, and ran-
dom data (one time each). Verification is performed to
check if the data was correctly written. (See "Erasing
Data on the Printer's Hard Disk.") →P.709
Output
Meth-
od
Print Select the printing method for jobs received from soft-
ware other than the printer driver. When using the
printer driver, configure settings on the printer.
To print as usual, select Print. Selecting Print (Auto
Del) will print the job and then delete the data from
the printer's hard disk. Selecting Save: Box 01 will
only save the print job in the box, without printing it.
Print (Auto Del)
Save: Box 01
Print After Recv A setting for jobs received from software other than
the printer driver. When using the printer driver, con-
figure settings on the printer. Select On to print the
job after it has been saved.
Save: Shared Box Select Off to print without saving jobs in the box
shared among multiple users.
Show Job Log Selecting Off prevents display of the log in Job Menu
> Job Log. Additionally, the log is not printed if you
choose Job Menu > Print Job Log. Note that because
job logs are not collected, the Status Monitor account-
ing functions will not work correctly.
Prep.MovePrinter Select this option when transferring the printer to an-
other location. Follow the instructions displayed to
complete the required procedure. (See "Preparing to
Transfer the Printer.") →P.830
Not displayed during a warning message that the re-
maining Maintenance Cartridge capacity is low.
Control Panel
>
Printer Menu
>
iPF755
Menu Settings
9
749
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
