Cardinal 190 Series - Page 100

Model 190 Installation, Technical and Operation
8400-M022-O1 Rev J
Page 90
print?
Print Tab Settings Configuration (Select YES or NO)
port=
Disable or Select Serial Interface for Printing
HoUr=
Time Print Location
date=
Date Print Location
gross=
Gross Weight Print Location
tare=
Tare Weight Print Location
net=
Net Weight Print Location
g aCC=
Gross Weight Accumulator Print Location
n aCC=
Net Weight Accumulator Print Location
CoUnt=
Count "number of pieces on the scale" Print Location
EACH=
Piece Weight Print Location
CRLF=
Carriage Return Line Feed (Data Format Termination)
EoP=
End-Of-Print Line Feeds
opt?
Options Configuration (Select YES or NO)
opt=
Select Option Card Installed
baUd=
Select Option Card Baud Rate when Opt= 0 or 1
Prty=
Select Option Card Parity when Opt= 0 or 1
Cont2=
Enable or Disable Continuous Output to the Option Port
type=
If Opt=1 and Cont2=YES
(Select Continuous Output Format, SMA or Cardinal
Scoreboard)
baUd=
Select Field Bus Option Baud Rate when Opt= 2
Addr=
Select Field Bus Option MAC Address when Opt= 2
Color?
Display Backlight Color Setup (Select YES or NO)
dflt=
Select Default Backlight Color
Under=
Select Checkweigher “Under“ Backlight Color
ACCPt=
Select Checkweigher “Accept“ Backlight Color
oEr=
Select Checkweigher “Over“ Backlight Color