Cardinal 190 Series User Manual

Model 190 Installation, Technical and Operation
8400-M022-O1 Rev J
Page 1
1. SPECIFICATIONS
Power Requirements:
100 to 240 VAC (50/60 Hz) at 0.4A Max.
Enclosure Type:
Thermoplastic IP69K wall or desk-mount
Enclosure Size:
9.4” W x 6.4” H x 3.7" D
(239mm W x 163mm H x 93mm D)
Operating Environment:
Temperature: 14 to 104 ºF (-10 to +40 ºC)
Humidity: 90% non-condensing (maximum)
Display:
Six digit, seven segment, 1.0" high Backlit LCD
Transducer Excitation:
5.15 VDC
Signal Input Range:
0.5 mV min. to 40 mV max. (with dead load boost)
Number of Load Cells:
6 each, 350 OHM minimum resistance
Load Cell Cable Length:
1500 feet maximum.
30 feet maximum without sense lines
Consult factory for other requirements
Division Value:
1, 2, or 5 x 10, 1, 0.1, 0.01, 0.001 commercial
0 to 99, non-commercial
Sensitivity:
NON-COMMERCIAL
NTEP
CANADA
0.15 uV/e
0.5uV/e (Class III/IIIL)
0.5uV/e (Class III/IIIHD)
Scale Divisions:
NON-COMMERCIAL
NTEP
CANADA
100 to 240,000
100 to 10,000 (Class III/IIIL)
100 to 10,000 (Class III/IIIHD)
Internal Resolution:
1 part in 16,777,216
Tare Capacity:
Scale Capacity
Sample Rate:
1 to 100 samples per second, selectable
Auto Zero Range:
0.5 or 1 through 9 divisions
Weighing Units:
Pounds, Ounces, Kilograms, Grams
Keypad:
Color Coded Capacitive Touch type, 7 keys
Standard I/O:
(1) bi-directional RS232

Cardinal 190 Series Specifications

General

Touch Technology	Resistive
Display Size	19 inches
Resolution	1280 x 1024
Brightness	250 nits
Interface	USB
Operating System Compatibility	Windows, Linux
Environmental Rating	IP65
Active Area	376.32 x 301.06 mm