Cardinal 190 Series User Manual

Model 190 Installation, Technical and Operation
8400-M022-O1 Rev J
Page 81
5.2 Fn/ Key Functions
The Fn/ key is used to select several additional functions that may have
been enabled during the setup and calibration of the indicator. Those
functions include: Hold, Count, Time and Date, Peak Hold, Checkweigher,
Live Weight, Weight Accumulation and Backlight Color.
IMPORTANT! The Hold, Count and Live Weight functions cannot
be enabled if the Legal-For-Trade option (LFt=yes) was selected
during setup.
In addition, only one of the functions Hold, Count, Peak Hold,
Checkweigher or Live Weight can be enabled at a time.
Description of Fn/ Key Functions
Function
Display
Description or Setting
Hold
HoLd X
X will be 1 if enabled, 0 if disabled
Count
CoUnt X
X will be 1 if enabled, 0 if disabled
Time and Date
HH:MM A
HH=hours, MM=minutes,
A for AM, P for PM
MM.DD.YY
(usa=yes)
DD.MM.YY
(usa=no)
MM=month, DD=day, YY=last two
digits of year
Peak Hold
PhoLd X
X will be 1 if enabled, 0 if disabled
Checkweigher
Lo=
Minimum acceptable weight prompt
X
*
= minimum acceptable weight value.
*
When the value for Lo= is greater
than 0, the Checkweigher function
is enabled.
Hi=
Maximum acceptable weight prompt.
This prompt is displayed, when the
value for Lo= is greater than 0.
X
= maximum acceptable weight value
Live Weight
Act X
X will be 1 if enabled, 0 if disabled
Weight
Accumulation
ACCU X
X will be 1 if enabled, 0 if disabled
Backlight Color
Colors
Backlight Colors for normal operation
and Checkweigher results

Cardinal 190 Series Specifications

General

Touch Technology	Resistive
Display Size	19 inches
Resolution	1280 x 1024
Brightness	250 nits
Interface	USB
Operating System Compatibility	Windows, Linux
Environmental Rating	IP65
Active Area	376.32 x 301.06 mm