Fn/ (Up Arrow): The Fn/ key is used for
several functions.
During indicator setup, when a setup
parameter (not a parameter value or setting)
is displayed, pressing the Fn/ key will
"backup" to the previous parameter prompt.
Also during setup, when a parameter value
or setting is displayed, pressing the Fn/
key will "toggle" between the different
available values or settings for that
parameter.
In normal operation, the Fn/ key is used in
conjunction with the other keys on the keypad to
access additional indicator features.
PRINT: Pressing the PRINT key during a
weighing operation, will add the displayed Gross
weight, or Net weight to the associated
accumulator and send print ticket data to the
serial interface selected during setup (see
Port=).
NOTE: The indicator will not respond to
pressing the PRINT key unless the weight
display is stable.
If displaying Gross weight, the only weight
printed is Gross weight.
If displaying Net weight, the Gross, Tare,
and Net weights are printed.
When in Gross weight accumulator display
mode, pressing the PRINT key will print the
Gross weight accumulator.
When in Net weight accumulator display
mode, pressing the PRINT key will print the
Net weight accumulator.
When in Peak weight display mode,
pressing the PRINT key will print the Peak
weight.
To Next Page
Loading...
Need help?
General
