Managing Ports
Chapter 6: Managing Your Network 215
To assign a port to... See...
VLAN or
VLAN Trunk
Configuring VLANs on page 179
A WAN Internet connection The procedure below.
Note: When you configure an Ethernet-based Internet
connection on a port, the port is automatically assigned to
Internet use. For information on configuring an Internet
connection, see Using Internet Setup on page
113.
DMZ Configuring a DMZ Network
Console Using a Console on page
589
A VLAN network, dynamically
assigned by a RADIUS server
Configuring Port-Based Security on page
348
A printer Setting Up Network Printers on page
630
An RS232 Modem Setting Up an RS232 Modem on page
146
A USB-based modem Setting Up a USB Modem on page
149
To modify a port assignment
1. Click Network in the main menu, and click the Ports tab.
The Ports page appears.
2. Next to the desired port, click Edit.
To Next Page
Loading...
