Check Point UTM-1 Edge - Page 294

Configuring Wireless Networks
280 Check Point UTM-1 Edge User Guide
4. Click Next.
The Wireless Security Complete dialog box appears.
5. Click Finish.
The wizard closes.
6. Prepare the wireless stations.
No Security
The Wireless Security Complete dialog box appears.
• Click Finish.
The wizard closes.
Manually Configuring a Wireless Network
To manually configure a wireless network
1. Prepare the appliance for a wireless connection as described in Preparing the
Edge Appliance for a Wireless Connection on page
77.
2. If you want to use 802.1x or WPA-Enterprise security mode for the wireless
network, configure a RADIUS server.
For information on security modes, see Basic Wireless Settings Fields on page
284.
For information on configuring RADIUS servers, see Using RADIUS Authentication
on page
553.
3. Click Network in the main menu, and click the My Network tab.
The My Network page appears.
4. In the desired wireless network's row, click Edit.