SmartDefense Categories
410 Check Point UTM-1 Edge User Guide
In this field… Do this…
Track Specify whether to issue logs for scans, by selecting one of the following:
• Log. Issue logs. This is the default.
• None. Do not issue logs. This is the default.
Detect scans
from Internet only
Specify whether to detect only scans originating from the Internet, by
selecting one of the following:
• False. Do not detect only scans from the Internet. This is the
default.
• True. Detect only scans from the Internet.
FTP
This category allows you to configure various protections related to the FTP protocol. It
includes the following:
• Block Known Ports on page
412
• Block Port Overflow on page
413
• Blocked FTP Commands on page
414
• FTP Bounce on page
411
To Next Page
Loading...
