55-15
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 55 Configuring the Content Security and Control Application on the CSC SSM
Feature History for the CSC SSM
Feature History for the CSC SSM
Table 55-2 lists each feature change and the platform release in which it was implemented. ASDM is
backwards-compatible with multiple platform releases, so the specific ASDM release in which support
was added is not listed.
Table 55-2 Feature History for the CSC SSM
Feature Name Platform Releases Feature Information
CSC SSM 7.0(1) The CSC SSM runs Content Security and Control software, which provides
protection against viruses, spyware, spam, and other unwanted traffic.
The CSC Setup Wizard enables you to configure the CSC SSM in ASDM. The
following screen was introduced: Configuration > Trend Micro Content Security
> CSC Setup.
CSC SSM 8.1(1) and 8.1(2) This feature is not supported on the ASA 5580.
CSC syslog format 8.3(1) CSC syslog format is consistent with the adaptive security appliance syslog
format. Syslog message explanations have been added to the Cisco Content
Security and Control (CSC) SSM Administrator Guide. The source and destination
IP information has been added to the ASDM Log Viewer GUI. All syslog messages
include predefined syslog priorities and cannot be configured through the CSC
SSM GUI.
Clearing CSC
events
6.3(2) Support for clearing CSC events in the Latest CSC Security Events pane has been
added. The following screen was modified: Home > Content Security.
To Next Page
Loading...
Need help?
General
