58-11
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 58 Using the High Availability and Scalability Wizard
Feature History for the High Availability and Scalability Wizard
Step 7 Specify the name or IP address of the private interface for this device.
Step 8 Check the Send FQDN to client instead of an IP address when redirecting check box to have the VPN
cluster master send a fully qualified domain name using the host and domain name of the cluster device
instead of the outside IP address when redirecting VPN client connections to that cluster device.
Feature History for the High Availability and Scalability Wizard
Table 58-1lists each feature change and the platform release in which it was implemented. ASDM is
backwards-compatible with multiple platform releases, so the specific ASDM release in which support
was added is not listed.
Table 58-1 Feature History for the High Availability and Scalability Wizard
Feature Name ASDM Releases Feature Information
High Availability and Scalability Wizard 5.2(1) This feature was introduced.
IPv6 Address Support in Failover
Configurations
6.2(5) This features was introduced. The following screens of
the High Availability and Scalability Wizard were
modified to allow the use of IPv6 Addresses:
• Failover Peer Connectivity and Compatibility
Check
• Failover Link Configuration
• State Link Configuration
• Standby Address Configuration
To Next Page
Loading...
Need help?
General
