70-3
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 70 Monitoring VPN
VPN Statistics
VPN Statistics
These panes show detailed parameters and statistics for a specific remote-access, LAN-to-LAN,
Clientless SSL VPN, or E-mail Proxy session. The parameters and statistics differ depending on the
session protocol. The contents of the statistical tables depend on the type of connection you choose. The
detail tables show all the relevant parameters for each session.
Sessions
Use this pane to view session statistics for the adaptive security appliance.
Fields
• Session types (unlabeled)—Lists the number of currently active sessions of each type, the total limit,
and the total cumulative session count.
–
Remote Access—Shows the number of remote access sessions.
–
Site-to-Site—Shows the number of LAN-to-LAN sessions.
–
SSL VPN–Clientless—Shows the number of clientless browser-based VPN sessions.
• SSL VPN–With Client—Shows the number of client-based SSL VPN sessions. With ASA version
8.x and above , this represents the AnyConnect SSL VPN client 2.x and above.
–
SSL VPN–Inactive—Shows the number of SSL VPN sessions that are inactive on the remote
computer.
Note An administrator can keep track of the number of users in the inactive state and can look
at the statistics. The sessions that have been inactive for the longest time are marked as
idle (and are automatically logged off) so that license capacity is not reached and new
users can log in. You can also access these statististics using the show vpn-sessiondb
CLI command (refer to the Cisco Security Appliance Command Reference Guide).
–
SSL VPN–Total—Shows the number of client-based and clientless SSL VPN sessions.
–
E-mail Proxy—Shows the number of E-mail proxy sessions.
–
VPN Load Balancing—Shows the number of load-balanced VPN sessions
–
Total—Shows the total number of active concurrent sessions.
–
Total Cumulative—Shows the cumulative number of sessions since the last time the adaptive
security appliance was rebooted or reset.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• — • ——
To Next Page
Loading...
Need help?
General
