27-20
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 27 Configuring Network Object NAT
Configuration Examples for Network Object NAT
Figure 27-32 Configuring Interfaces
Step 5 Click OK to return to the Edit Network Object dialog box, click OK again, and then click Apply.
NAT for Inside Hosts (Dynamic NAT) and NAT for an Outside Web Server
(Static NAT)
The following example configures dynamic NAT for inside users on a private network when they access
the outside. Also, when inside users connect to an outside web server, that web server address is
translated to an address that appears to be on the inside network. (See Figure 27-33).
To Next Page
Loading...
Need help?
General
