27-21
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 27 Configuring Network Object NAT
Configuration Examples for Network Object NAT
Figure 27-33 Dynamic NAT for Inside, Static NAT for Outside Web Server
Step 1 Create a network object for the inside network:
Figure 27-34 Adding a Network Object
Step 2
Define the addresses for the inside network:
Outside
Inside
10.1.2.1
209.165.201.1
Security
Appliance
myInsNet
10.1.2.0/24
Web Server
209.165.201.12
209.165.201.12 10.1.2.20
248773
Undo Translation
10.1.2.10 209.165.201.20
Translation