28-21
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 28 Configuring Twice NAT
Configuration Examples for Twice NAT
Figure 28-34 Defining the Inside Network Addresses
c.
Choose the new network object by double-clicking it. Click OK to return to the NAT configuration.
Figure 28-35 Choosing the New Network Object
Step 4
For the Original Destination Address, click the browse button to add a new network object for DMZ
network 1 in the Browse Original Destination Address dialog box.
a. Add the new network object.
Figure 28-36 Adding a New Network Object for the DMZ Network 1
b.
Define the DMZ network 1 addresses, and click OK.
To Next Page
Loading...
Need help?
General
