28-26
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 28 Configuring Twice NAT
Configuration Examples for Twice NAT
Figure 28-51 Adding a New Network Object for the PAT Address
b.
Define the PAT address, and click OK.
Figure 28-52 Defining the PAT Address
c.
Choose the new network object by double-clicking it. Click OK to return to the NAT configuration.
Figure 28-53 Choosing the New Network Object
Step 15
For the Translated Destination Address, type the name of the Original Destination Address
(DMZnetwork2) or click the browse button to choose it.
Because you do not want to translate the destination address, you need to configure identity NAT for it
by specifying the same address for the Original and Translated destination addresses.
To Next Page
Loading...
Need help?
General
