38-12
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 38 Configuring Inspection for Voice and Video Protocols
H.323 Inspection
Modes
The following table shows the modes in which this feature is available:
Add/Edit HSI Group
The Add/Edit HSI Group dialog box lets you configure HSI Groups.
Fields
• Group ID—Enter the HSI group ID.
• IP Address—Enter the HSI IP address.
• Endpoints—Lets you configure the IP address and interface of the endpoints.
–
IP Address—Enter an endpoint IP address.
–
Interface—Specifies an endpoint interface.
• Add—Adds the HSI group defined.
• Delete—Deletes the selected HSI group.
Modes
The following table shows the modes in which this feature is available:
Add/Edit H.323 Map
The Add/Edit H.323 Inspect dialog box lets you define the match criterion and value for the H.323
inspect map.
Fields
• Single Match—Specifies that the H.323 inspect has only one match statement.
• Match Type—Specifies whether traffic should match or not match the values.
For example, if No Match is selected on the string “example.com,” then any traffic that contains
“example.com” is excluded from the class map.
• Criterion—Specifies which criterion of H.323 traffic to match.
–
Called Party—Match the called party.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
••••—
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
••••—