Cisco 5510 - ASA SSL / IPsec VPN Edition Configuration Guide

38-40
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 38 Configuring Inspection for Voice and Video Protocols
Skinny (SCCP) Inspection
Message ID Filtering
The Message ID Filtering dialog box lets you configure the settings for a message ID filter.
Fields
• Match Type—Shows the match type, which can be a positive or negative match.
• Criterion—Shows the criterion of the inspection.
• Value—Shows the value to match in the inspection.
• Action—Shows the action if the match condition is met.
• Log—Shows the log state.
• Add—Opens the Add Message ID Filtering dialog box to add a message ID filter.
• Edit—Opens the Edit Message ID Filtering dialog box to edit a message ID filter.
• Delete—Deletes a message ID filter.
• Move Up—Moves an entry up in the list.
• Move Down—Moves an entry down in the list.
Modes
The following table shows the modes in which this feature is available:
Add/Edit SCCP (Skinny) Policy Map (Security Level)
The Add/Edit SCCP (Skinny) Policy Map pane lets you configure the security level and additional
settings for SCCP (Skinny) application inspection maps.
Fields
• Name—When adding an SCCP (Skinny) map, enter the name of the SCCP (Skinny) map. When
editing an SCCP (Skinny) map, the name of the previously configured SCCP (Skinny) map is shown.
• Description—Enter the description of the SCCP (Skinny) map, up to 200 characters in length.
• Security Level—Select the security level (high or low).
– Low—Default.
Registration: Not enforced.
Maximum message ID: 0x181.
Minimum prefix length: 4
Media timeout: 00:05:00
Signaling timeout: 01:00:00.
RTP conformance: Not enforced.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
••••—

Cisco 5510 - ASA SSL / IPsec VPN Edition Specifications

General

Brand	Cisco
Model	5510 - ASA SSL / IPsec VPN Edition
Category	Firewall
Language	English