38-43
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 38 Configuring Inspection for Voice and Video Protocols
Skinny (SCCP) Inspection
Fields
• Match Type—Specifies whether traffic should match or not match the values.
For example, if No Match is selected on the string “example.com,” then any traffic that contains
“example.com” is excluded from the class map.
• Criterion—Specifies which criterion of SCCP (Skinny) traffic to match.
–
Message ID—Match specified message ID.
Message ID—Specify value of maximum SCCP message ID allowed.
–
Message ID Range—Match specified message ID range.
Lower Message ID—Specify lower value of SCCP message ID allowed.
Upper Message ID—Specify upper value of SCCP message ID allowed.
• Action—Drop packet.
• Log—Enable or disable.