EasyManuals Logo

Cisco 5510 - ASA SSL / IPsec VPN Edition Configuration Guide

Cisco 5510 - ASA SSL / IPsec VPN Edition
1822 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #888 background imageLoading...
Page #888 background image
38-42
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 38 Configuring Inspection for Voice and Video Protocols
Skinny (SCCP) Inspection
• Security Level—Shows the security level and message ID filtering settings to configure.
• Parameters—Tab that lets you configure the parameter settings for SCCP (Skinny).
–
Enforce endpoint registration—Enforce that Skinny endpoints are registered before placing or
receiving calls.
Maximum Message ID—Specify value of maximum SCCP message ID allowed.
–
SCCP Prefix Length—Specifies prefix length value in Skinny messages.
Minimum Prefix Length—Specify minimum value of SCCP prefix length allowed.
Maximum Prefix Length—Specify maximum value of SCCP prefix length allowed.
–
Media Timeout—Specify timeout value for media connections.
–
Signaling Timeout—Specify timeout value for signaling connections.
• RTP Conformance—Tab that lets you configure the RTP conformance settings for SCCP (Skinny).
–
Check RTP packets for protocol conformance—Checks RTP/RTCP packets flowing on the
pinholes for protocol conformance.
Limit payload to audio or video, based on the signaling exchange—Enforces the payload type
to be audio/video based on the signaling exchange.
• Message ID Filtering—Tab that lets you configure the message ID filtering settings for SCCP
(Skinny).
–
Match Type—Shows the match type, which can be a positive or negative match.
–
Criterion—Shows the criterion of the inspection.
–
Value—Shows the value to match in the inspection.
–
Action—Shows the action if the match condition is met.
–
Log—Shows the log state.
–
Add—Opens the Add Message ID Filtering dialog box to add a message ID filter.
–
Edit—Opens the Edit Message ID Filtering dialog box to edit a message ID filter.
–
Delete—Deletes a message ID filter.
–
Move Up—Moves an entry up in the list.
–
Move Down—Moves an entry down in the list.
Modes
The following table shows the modes in which this feature is available:
Add/Edit Message ID Filter
The Add Message ID Filter dialog box lets you configure message ID filters.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
••••—

Table of Contents

Other manuals for Cisco 5510 - ASA SSL / IPsec VPN Edition

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 5510 - ASA SSL / IPsec VPN Edition and is the answer not in the manual?

Cisco 5510 - ASA SSL / IPsec VPN Edition Specifications

General IconGeneral
BrandCisco
Model5510 - ASA SSL / IPsec VPN Edition
CategoryFirewall
LanguageEnglish

Related product manuals