Cisco 8800 Series User Manual

Cisco IP Phone Power Cube 4802.3at PoE802.3af Power over Ethernet
(PoE)
Configuration
YesYesNo8861 with 1 key expansion
module
YesYes
See the first note below
No8861 with 2 key expansion
modules
YesYes
See the first note below
No8861 with 3 key expansion
modules
• The fast-charging feature on the back USB does not work when more than one key expansion module
is attached to a Cisco IP Phone 8861 using 802.3at PoE.
• The fast-charging feature on the back USB doesn’t work when more than one key expansion module is
attached to a Cisco IP Phone 8861, unless Cisco Universal PoE (UPoE) is used.
• Cisco IP Phone 8851 with 2 key expansion modules works on 802.3at PoE only with v08 or later hardware.
You can find the phone version information on the lower back of the phone as part of the TAN and PID
label. Version information is also located on the individual phone packaging.
Note
Table 17: Power-Supply Compatibility for Cisco IP Phone 8851/8861 Key Expansion Module and Cisco IP Phone 8865 Key Expansion Module
Cisco IP Phone Power Cube 4802.3at PoE802.3af Power over Ethernet
(PoE)
Configuration
YesYesYes8851 with 1 key expansion
module
YesYes
See the third note below
No8851with 2 key expansion
modules
YesYesNo8861 and 8865 with 1 key
expansion module
YesYes
See the first note below
No8861 and 8865 with 2 key
expansion modules
YesYes
See the first note below
No8861 and 8865 with 3 key
expansion modules
Cisco IP Phone 8800 Series Multiplatform Phones User Guide
188
Accessories
Key Expansion Module Power Information

Cisco 8800 Series Specifications

General

Protocols	SIP, SCCP
Audio	Wideband audio
Connectivity	Gigabit Ethernet
Power	Power over Ethernet (PoE)
Bluetooth	Yes
USB	Yes
Codec Support	G.711, G.722, G.729, iLBC
Dimensions	Varies by model
Weight	Varies by model
Wi-Fi	Yes (varies by model)