Contents
xii
Cisco 4700 Series Application Control Engine Appliance Administration Guide
OL-11157-01
Clearing the Redundancy History 7-58
CHAPTER
8 Configuring SNMP 8-1
SNMP Overview 8-2
Managers and Agents 8-3
SNMP Manager and Agent Communication 8-4
SNMP Traps and Informs 8-5
SNMPv3 CLI User Management and AAA Integration 8-6
CLI and SNMP User Synchronization 8-6
Supported MIBs and Notifications 8-7
SNMP Limitations 8-24
SNMP Configuration Quick Start 8-25
Configuring SNMP Users 8-27
Defining SNMP Communities 8-29
Configuring an SNMP Contact 8-31
Configuring an SNMP Location 8-31
Configuring SNMP Notifications 8-32
Configuring SNMP Notification Hosts 8-32
Enabling SNMP Notifications 8-34
Enabling the IETF Standard for SNMP linkUp and linkDown Traps 8-36
Assigning a Trap-Source Interface for SNMP Traps 8-37
Configuring SNMP Management Traffic Services 8-38
Creating and Configuring a Layer 3 and Layer 4 Class Map 8-39
Defining a Class Map Description 8-40
Defining SNMP Protocol Match Criteria 8-41
Creating a Layer 3 and Layer 4 Policy Map 8-42
Creating a Layer 3 and Layer 4 Policy Map for SNMP Network
Management Traffic Received by the ACE
8-42
Specifying a Layer 3 and Layer 4 Traffic Class with the Traffic Policy 8-43
To Next Page
Loading...
