xi
Cisco 4700 Series Application Control Engine Appliance Administration Guide
OL-11157-01
Contents
Creating a Tracking and Failure Detection Process for a Host or
Gateway
7-30
Configuring the Gateway or Host IP Address Tracked by the Active
Member
7-30
Configuring a Probe on the Active Member for Host Tracking 7-31
Configuring a Priority on the Active Member for Multiple Probes 7-32
Configuring the Gateway or Host IP Address Tracked by the Standby
Member
7-32
Configuring a Probe on the Standby Member for Host Tracking 7-33
Configuring a Priority on the Standby Member for Multiple Probes 7-33
Example of a Tracking Configuration for a Gateway 7-34
Configuring Tracking and Failure Detection for an Interface 7-35
Creating a Tracking and Failure Detection Process for an Interface 7-35
Configuring the Interface Tracked by the Active Member 7-36
Configuring a Priority for a Tracked Interface on the Active Member 7-36
Configuring the Interface Tracked by the Standby Member 7-37
Configuring a Priority for a Tracked Interface on the Standby
Member
7-37
Example of a Tracking Configuration for an Interface 7-38
Example of a Redundancy Configuration 7-38
Displaying Redundancy Information 7-41
Displaying Redundancy Configurations 7-41
Displaying FT Group Information 7-41
Displaying the IDMAP Table 7-46
Displaying the Redundancy Internal Software History 7-47
Displaying Memory Statistics 7-47
Displaying Peer Information 7-47
Displaying FT Statistics 7-51
Displaying FT Tracking Information 7-54
Clearing Redundancy Statistics 7-58
Clearing FT Statistics 7-58
To Next Page
Loading...
