6-9
Cisco 4700 Series Application Control Engine Appliance Administration Guide
OL-11157-01
Chapter 6 Viewing ACE Hardware and Software Configuration Information
Displaying System Processes
Table 6-5 describes the fields in the show processes cpu command output.
Ta b l e 6-5 Field Descriptions for the show processes cpu Command
Field Description
CPU Utilization Lists the percentage of CPU utilization for the ACE
for a
5-second interval, 1-minute interval, and a
5-minute interval
PID Process identifier
Runtime (ms) CPU time the process has used, expressed in
mil
liseconds
Invoked Number of times that the process has been invoked
uSecs Microseconds of CPU time as an average for each
pro
cess invocation
1 Sec CPU utilization as a percentage for the last second
5 Sec CPU utilization as a percentage for the last 5 seconds
1 Min CPU utilization as a percentage for the last minute
5 Min CPU utilization as a percentage for the last 5 minutes
Process Name of the process
Table 6-6
describes the fields in the show processes log command output.
Ta b l e 6-6 Field Descriptions for the show processes log Command
Field Description
Process Name of the process
PID Process identifier
Normal-exit Status of whether the proc
ess exited normally
Stack Status of whether a stack trace is in the log
Core Status of whether a core file exists
Log-create-time Time when the log file was generated
To Next Page
Loading...
