Chapter 7 Configuring Redundant ACE Appliances
Displaying Redundancy Information
7-48
Cisco 4700 Series Application Control Engine Appliance Administration Guide
OL-11157-01
The keywords and arguments are:
• peer_id—Unique identifier of the remote peer
• detail—Displays detailed peer information
• status—Displays the current operating status of the peer
• summary—Displays summary peer information
For example, enter:
host1/Admin# show ft peer 1
Table 7-4 describes the fields in the show ft peer command output.
Ta b l e 7-4 Field Descriptions for the show ft peer Command Output
Field Description
Peer ID Identifier of the remote co
ntext in the FT group.
State Current state of the peer. Possible states are:
FSM_PEER_STATE_INIT—Initial state of the peer after
yo
u configure it.
FSM_PEER_STATE_MY_IPADDR—Local A
CE IP
address is missing. Waiting for the local IP address to be
configured.
FSM_PEER_STATE_PEER_IPADDR—Peer IP addres
s is
missing. Waiting for the peer IP address to be configured.
FSM_PEER_STATE_START_HB—Peer configuration is
c
omplete. Starting the heartbeat to see if there is a peer
device.
To Next Page
Loading...
