8-51
Cisco 4700 Series Application Control Engine Appliance Administration Guide
OL-11157-01
Chapter 8 Configuring SNMP
Displaying SNMP Statistics
Illegal operation
for community
name supplied
Number of packets that request an operation but are not
allowed for that community
Encoding errors Number of SNMP packets that w
ere improperly encoded
Number of
requested
variables
Number of variables requested by SNMP managers
Number of
altered v
ariables
Number of variables altered by SNMP managers
Get-request
PDUs
Number of get requests received
Get-next PDUs Number of get-next requests received
Set-request PDUs Number of set requests received
SNMP packets
ou
tput
Total number of SNMP packets sent by the ACE
Too big errors Number of SNMP packets that were larger than the
maximu
m packet size
No such name
error
s
Number of SNMP requests that specified a MIB object that
does not exist
Bad values errors Number of SNMP set requests that specified an invalid value
for
a MIB object
General errors Number of SNMP set requests that failed due to some other
e
rror, such as a noSuchName error, badValue error, or any of
the other specific errors
Community SNMP community name for the ACE
Group/Access Access rights for the commun
ity: read-only
User
String that identifies the name of the SNMP user
Auth Authentication of a packet without encryption
Priv Authentication of a packet with encryption
Group User role group to which the user belongs
Table 8-5 Field Descriptions for the show snmp Command Output
Field Description
To Next Page
Loading...
