Chapter 8 Configuring SNMP
Displaying SNMP Statistics
8-52
Cisco 4700 Series Application Control Engine Appliance Administration Guide
OL-11157-01
Table 8-6 describes the fields in the show snmp community command output.
Ta b l e 8-6 Field Descriptions for the show snmp community Command
Output
Field Description
Community SNMP community name for the ACE
Group/Access Access rights for the commun
ity: read-only
Table 8-7
describes the fields in the show snmp engineID command output.
Ta b l e 8-7 Field Descriptions for the show snmp engineID Command Output
Field Description
Local SNMP
engi
neID
Identification number of the local SNMP engine on the ACE
Table 8-8
describes the fields in the show snmp group command output.
Ta b l e 8-8 Field Descriptions for the show snmp group Command Output
Field Description
Group name Name of the SNMP group or collection of users that have a
c
ommon access policy
Security model Security model used by the group, either v1, v2c, or v3
Security level Security level used by the group
Read view String that identifies the read view of the group
Write view String that identifies the write view of the group
Notify view String that identifies the notify view of the group
Storage-type Status of whether the settings have been set in volatile or
tempo
rary memory on the device, or in nonvolatile or
persistent memory where settings will remain after the
device has been turned off and on again
Row status Status of whether the Row stat
us for the SNMP group is
active or inactive
To Next Page
Loading...
