8-53
Cisco 4700 Series Application Control Engine Appliance Administration Guide
OL-11157-01
Chapter 8 Configuring SNMP
Displaying SNMP Statistics
Table 8-9 describes the fields in the show snmp host command output.
Ta b l e 8-9 Field Descriptions for the show snmp host Command Output
Field Description
Host IP address of the target host
Port UDP port number to which notifications will be sent
Vers i o n Version of SNMP used to send the trap, either v1, v2c, or v3
Level Method for authentication and privacy
Type Type of notification configured
SecName Security name for scanning the target host
Table 8-10 describes th
e fields in the show snmp sessions command output.
Ta b l e 8-10 Field Descriptions for the show snmp sessions Command Output
Field Description
Destination IP address of a target for which traps or informs have been
se
nt
Table 8-11 describes th
e fields in the show snmp user command output.
Ta b l e 8-11 Field Descriptions for the show snmp user Command Output
Field Description
User String that identifies the name of the SNMP user
Auth Authentication of a pack
et without encryption
Priv Authentication of a packet with encryption
Group User role group to which the user belongs
To Next Page
Loading...
