vii
Cisco 4700 Series Application Control Engine Appliance Administration Guide
OL-11157-01
Contents
Configuring a Layer 3 and Layer 4 Policy Map 4-43
Creating a Layer 3 and Layer 4 Policy Map for Network Management Traffic
Received by the ACE
4-44
Creating a Layer 3 and Layer 4 Policy Map for Network Traffic Passing
Through the ACE
4-45
Defining a Layer 3 and Layer 4 Policy Map Description 4-45
Specifying a Layer 3 and Layer 4 Traffic Class With the Traffic Policy 4-46
Specifying Layer 3 and Layer 4 Policy Actions 4-47
Using Parameter Maps in a Layer 3 and Layer 4 Policy Map 4-49
Configuring a Layer 7 Policy Map 4-50
Creating a Layer 7 Policy Map 4-51
Adding a Layer 7 Policy Map Description 4-53
Including Inline Match Statements in a Layer 7 Policy Map 4-53
Specifying a Layer 7 Traffic Class with the Traffic Policy 4-54
Specifying Layer 7 Policy Actions 4-55
Associating the Layer 7 Policy Map with a Layer 3 and Layer 4 Policy
Map
4-57
Applying a Service Policy 4-58
Class Maps and Policy Map Examples 4-60
Firewall Example 4-60
Layer 7 Load-Balancing Example 4-63
Layer 3 and Layer 4 Load-Balancing Example 4-65
VIP With Connection Parameters Example 4-66
Example of a Traffic Policy Configuration 4-68
Viewing Class Maps, Policy Maps, and Service Policies 4-71
Displaying Class Map Configuration Information 4-71
Displaying Policy Map Configuration Information 4-71
Displaying Service Policy Configuration Information 4-72
To Next Page
Loading...
