Cisco ASR 9000 Series Routing Configuration Guide

SUMMARY STEPS
1.
configure
2.
Use one of these commands:
•
rcc {ipv4 | ipv6} unicast {enable | period milliseconds}
•
lcc {ipv4 | ipv6} unicast {enable | period milliseconds}
3.
commit
4.
Use one of these commands.
•
show rcc {ipv4| ipv6} unicast [summary | scan-id scan-id-value]
•
show lcc {ipv4| ipv6} unicast [summary | scan-id scan-id-value]
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Triggers RCC or LCC background scan. Use the period
option to control how often the verification be triggered.
Use one of these commands:
Step 2
•
rcc {ipv4 | ipv6} unicast {enable | period milliseconds}
Each time the scan is triggered, verification is resumed
from where it was left out and one buffer’s worth of
•
lcc {ipv4 | ipv6} unicast {enable | period milliseconds}
routes or labels are sent to the forwarding information
base (FIB).
Example:
RP/0/RSP0/CPU0:router(config)#rcc ipv6 unicast enable
RP/0/RSP0/CPU0:router(config)#rcc ipv6 unicast period
500
Or
RP/0/RSP0/CPU0:router(config)#lcc ipv6 unicast enable
RP/0/RSP0/CPU0:router(config)#lcc ipv6 unicast period
500
commit
Step 3
Displays statistics about background scans.Use one of these commands.
Step 4
• summary—Displays the current ongoing scan id
and a summary of the previous few scans.
•
show rcc {ipv4| ipv6} unicast [summary | scan-id
scan-id-value]
•
show lcc {ipv4| ipv6} unicast [summary | scan-id
scan-id-value]
• scan-id scan-id-value—Displays details about a
specific scan.
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
511
Implementing and Monitoring RIB
Enabling RCC and LCC Background Scan

Cisco ASR 9000 Series Specifications

General

Brand	Cisco
Model	ASR 9000 Series
Category	Network Router
Language	English