Cisco IE-5000 User Manual

260
Configuring Smartports Macros
Monitoring and Maintaining Smartports Macros
Monitoring and Maintaining Smartports Macros
4. macro global {apply | trace}
macro-name [parameter {value}]
[parameter {value}] [parameter {value}]
Applies each individual command defined in the macro to the switch by
entering macro global apply macro-name. Specifies macro global
trace macro-name to apply and to debug a macro to find any syntax or
configuration errors.
Appends the macro with the required values by using the parameter
value keywords. Keywords that begin with $ require a unique parameter
value.
You can use the macro global apply macro-name ? command to
display a list of any required values for the macro. If you apply a macro
without entering the keyword values, the commands are invalid and are
not applied.
(Optional) Specifies unique parameter values that are specific to the
switch. You can enter up to three keyword-value pairs. Parameter
keyword matching is case sensitive. The corresponding value replaces
all matching occurrences of the keyword.
5. interface interface-id (Optional) Enters interface configuration mode and specifies the
interface on which to apply the macro.
6. default interface interface-id (Optional) Clears all configuration from the specified interface.
7. macro {apply | trace} macro-name
[parameter {value}] [parameter {value}]
[parameter {value}]
Applies each individual command defined in the macro to the port by
entering macro global apply macro-name. Specifies macro global
trace macro-name to apply and to debug a macro to find any syntax or
configuration errors.
Appends the macro with the required values by using the
parameter
value keywords. Keywords that begin with $ require a unique parameter
value.
You can use the macro global apply macro-name ? command to
display a list of any required values for the macro. If you apply a macro
without entering the keyword values, the commands are invalid and are
not applied.
(Optional) Specifies unique parameter values that are specific to the
switch. You can enter up to three keyword-value pairs. Parameter
keyword matching is case sensitive. The corresponding value replaces
all matching occurrences of the keyword.
8. end Returns to privileged EXEC mode.
9. show running-config interface
interface-id
Verifies that the macro is applied to an interface.
10. copy running-config startup-config (Optional) Saves your entries in the configuration file.
Command Purpose
Table 32 Commands for Displaying Smartports Macros
Command Purpose
show parser macro Displays all Smartports macros.

Cisco IE-5000 Specifications

General

Brand	Cisco
Model	IE-5000
Category	Switch
Language	English