Filler and Blank Cards
The filler card (15454- FILLER) is designed to occupy empty multiservice and AIC-I slots in the Cisco ONS
15454 (Slots 1 to 6, 9, and 12 to17). The filler card cannot operate in the cross-connect (XC) slots (Slots 8
and 10) or TCC2/TCC2P/TCC3 slots (Slots 7 and 11). The filler card is detected by CTC.
When installed, the filler card aids in maintaining proper air flow and EMI requirements.
Do not use 15454-M-FILLER or 15454-M-T-FILLER filler cards in the Cisco ONS 15454 M12 shelf.
Note
The following figure shows the card faceplate. The filler card has no card-level LED indicators.
Blank cards (15454-BLANK) can be installed in any empty slot in the shelf. CTC does not detect blank cards.
Cisco ONS 15454 Hardware Installation Guide
156
Installing the ONS 15454 M12 (ANSI and ETSI) Shelf
Filler and Blank Cards
To Next Page
Loading...
