Procedure
Step 1 Complete the DLP-G11 Open the FMEC Cover , on page 61.
Step 2 Complete the DLP-G12 Remove the FMEC Cover , on page 62.
Step 3 Continue with the NTP-G6 Install the MIC-A/P and MIC-T/C/P FMECs (ETSI Only), on page 66.
Stop. You have completed this procedure.
DLP-G11 Open the FMEC Cover
This task opens the FMEC cover. The FMEC cover must be opened to install the
MIC-A/P and the MIC-C/T/P.
Purpose
Medium slot-head screwdriverTools/Equipment
DLP-G9 Open the Front Cabinet Compartment (Door) , on page 57Prerequisite Procedures
RequiredRequired/As Needed
OnsiteOnsite/Remote
NoneSecurity Level
Procedure
Step 1 Unscrew the screws on the FMEC cover.
Cisco ONS 15454 Hardware Installation Guide
61
Installing the ONS 15454 M12 (ANSI and ETSI) Shelf
DLP-G11 Open the FMEC Cover
To Next Page
Loading...
