Cisco ONS 15454 - CHAPTER 5 Installing the ONS 15454 M6 Shelf

CHAPTER 5
Installing the ONS 15454 M6 Shelf
This chapter explains how to install the ONS 15454 M6 shelf.
Unless otherwise specified, the ECU module refers to the ECU, ECU2, ECU-S, and ECU-60V units. For
details about the various ECU modules, see the External Connection Units, on page 342.
Note
• ANSI Rack Installation, on page 272
• ETSI Rack Installation, on page 274
• Air Deflector, on page 276
• Air Plenum, on page 276
• Air Plenum Rack and Cabinet Compatibility, on page 278
• NTP-G344 Install the Air Plenum in ONS 15454 M6 Shelf, on page 279
• Air Flow Performance of ONS 15454 M6, on page 293
• NTP-G252 Install the ONS 15454 M6 Shelf , on page 294
• Front Door, on page 320
• NTP-G258 Install the Standard Door of the ONS 15454 M6 Shelf , on page 323
• NTP-G259 Open and Remove the Standard Door of the ONS 15454 M6 Shelf , on page 327
• NTP-G327 Install the Deep-Front Panel of the ONS 15454 M6 Shelf, on page 332
• NTP-G329 Remove the Deep-Front Panel of the ONS 15454 M6 Shelf , on page 339
• External Connection Units, on page 342
• NTP-G253 Install the ECU or ECU-S Module, on page 349
• NTP-L68 Upgrading to ONS 15454 M6 ECU60-S Module, on page 352
• Power Modules, on page 352
• NTP-G524 Install the Power Modules in the ONS 15454 M6 Shelf , on page 355
• LCD Unit, on page 366
• NTP-G255 Install the LCD Module in the ONS 15454 M6 Shelf, on page 366
• Power and Ground Description, on page 368
• NTP-G256 Install Power and Ground to the ONS 15454 M6 Shelf , on page 370
• Fan-Tray Assembly , on page 387
• NTP-G257 Install the Fan-Tray Assembly in the ONS 15454 M6 Shelf, on page 388
• Cable Routing and Management, on page 390
• NTP-G290 Install the Cable and Fiber Modules, on page 391
Cisco ONS 15454 Hardware Installation Guide
271